Site Rules

This is a legal requirement. Every exhibiting company must complete a Health & Safety Form and Risk Assessment for their stand. Please see the links below to complete each form.

Health & Safety and Risk Assessment

This is a legal requirement. Every exhibiting company must complete a Health & Safety form and Risk Assessment for their stand. The forms are now online please click on the links below to complete each form

Health & Safety Form

Risk Assessment 

Note, these forms are in addition to the Health & Safety form and Risk Assessment that accompanies space only stand plans.

Legal Requirements & Guidelines

Large/heavy exhibits

If you plan to exhibit a large or heavy piece of equipment or vehicle, please contact GES Logistics at the earliest time. Heavy Lifts by crane or forklift will be scheduled in advance. GES Logistics will schedule move-in and move-out of any large and heavy exhibits.

Lifting and handling onsite

GES Logistics have been appointed as our handling company. They are the preferred contractor for freight forwarding and storage, please contact them on +44 (0)121 782 4446 or event.logistics@ges.com 

Storage

It is not permissible to store packing materials (cases, pallets etc.) in the hall. GES Logistics will operate an empty case storage service: they will tag, remove, store and return your empty packing materials on request. Please order this service in by contacting the team on +44 (0)121 782 4446 or event.logistics@ges.com 

It is forbidden to store exhibits or materials between or behind stands due to the risk of fire.

Electrical Regulations

For safety and liability reasons, only the official electrical contractors, may carry out wiring and installation work at Packaging Innovations & Empack.  GES are the official Contractor for the exhibition; they are responsible and will carry out all work on the stands. Pre-fabrication is permitted but connection to the mains and all on-site wiring must be carried out by GES electricians.

The electrical facilities in the hall are subject to the regulations of the Local Authority and the venue. If the exhibitors’ power supply system is found to be faulty, or if it does not confirm to the relevant regulations in every aspect, the Organisers shall be entitled to refuse the connection of the system and/or the supply of power without recourse until the fault has been remedied.

We ask that you closely observe the deadline date for ordering electrical connections, to ensure that all orders can be processed, and services supplied in good time.

    • Power connections are made as soon as possible to each stand. If you intend to dress your stand on the Tuesday morning, please note that electricity may not be available immediately.
    • Power to all stands will be switched off each night 30 minutes after the show closes, unless a 24hr supply has been ordered in advance

Please contact the Operations team directly if you require a specific quote for a machinery main or a specific electrical supply.

Fire Regulations

All display materials must be flame retardant and conform to the UK legislation and eGuide. Failure in this will entail the removal of the offending fittings. All materials used in the building, decorations and coverings of stands must be approved, non-flammable materials. No explosives, flammable fluids or combustible materials may be used on any stand or stored within the venue. Fire Laws must be strictly observed, and wiring must comply with local regulation. A fire marshal may examine all stands, aisles, fire exits, and/or any other items at any time.

Patents & Copyrights

Exhibitors must comply with all relevant provisions of the Copyright Design and Patent Act of 1988.  Applications should be lodged with the Patents Office, 25 Southampton Buildings, London, WC2A 1A. www.patent.gov.uk for more information.

Contractors

Any exhibitor choosing to use contractors, must ensure they conduct their business appropriately. Any contractor deemed by the venue or Show Management team to be working in an unsafe, un-responsible and/or in any other manner deemed inappropriate, will be asked to leave immediately. The contracting exhibitor will be responsible for sourcing an alternative supplier to complete any unfinished work and will be liable for any costs incurred for delay to build up times.

Please ensure that your Contractor receives a copy of this Exhibitor Manual. Details on how to access the halls for build-up will be sent out 2 weeks before the show. Please ensure you forward this information to your contractor.

Age Limit/Children

No one under the age of 16 is permitted in the hall during the build-up and breakdown period. Please consult our official website to find out about the age limit during open times.

Personal Protective Equipment (PPE)

Safety footwear and high visibility jackets must be worn during the construction phases of the build, as a minimum. Additional PPE identified in the exhibitor’s/contractor’s Risk Assessment must also be worn. Any person not wearing the appropriate items for the activities they are performing, will be asked to leave until they have acquired the necessary items.

Security

There will be constant security cover at the exhibition. The Organisers will take every reasonable precaution throughout the Exhibition; however, organisers’ security is designed to secure the exhibition hall, not the contents of individual stands.

Exhibitors should remember that exhibition halls are very vulnerable places and should take appropriate precautions against theft, ensuring that their goods are safeguarded. Exhibitors should not leave their stands unattended during the build-up, breakdown or open hours of the show, and they must ensure that Exhibitor Badges are worn at all times.

Any incidents of theft must be reported immediately to the Organisers’ so that security can be informed, and incident reports can be written. Please note the following security advice regarding exhibiting at shows:

  • Build-up and breakdown: These are the most vulnerable times for theft. Ensure that there are at least two representatives setting up or dismantling your stand so that the stand is never left unattended. It is important that all products and portable items should be removed from your stand on the first evening of breakdown.
  • Sufficient staffing: Be sure to have enough staff to man your stand at all times. Never ask a neighbouring Exhibitor to watch your They may become busy and leave your stand unattended.
  • Avoid leaving your stand each evening before all visitors have cleared the exhibition hall, and ensure your stand is staffed prior to the show opening (remember the exhibition hall will be open from 8am for other Exhibitors and maintenance staff).
  • Lockable Cabinets: There is no cabinet included in your package. We do, however, recommend you have somewhere to lock away briefcases, mobile phones, handbags and laptops etc. during the day – even when you are on the stand. If you are busy, you may not notice if they are. Please note – most hired cabinets have common locks and should not be regarded as completely secure units.

 NB: Please make sure adequate arrangements have been made to insure your goods, as Easyfairs are not liable for any loss, damage or accident that may occur to any Exhibitors property (hired or purchased) or personnel. Therefore, Exhibitors MUST arrange full insurance cover.

Dilapidation & floor covering

Exhibitors are liable for any damage they may cause to buildings, floors, walls, and columns or to any shell scheme equipment or any other Exhibitor’s property. Exhibitors are also responsible for any damage caused by their agents or contractors. No Exhibitor may apply paint, lacquer, adhesives or coatings to the building or shell scheme, or drill holes into the floor.

The Organisers will inspect every site before erection and after demolition of the stands and any damage caused will be charged directly to the Exhibitor. This includes a charge for removing any carpet tape or heavy building waste left behind.

All stands require appropriate floor covering. The hall floor cannot be exposed. Floorcovering can be ordered from the shop accessed via your ‘My Easyfairs’ account. If you are laying your own floorcovering, please ensure you use exhibition approved carpet tape which will not leave marks on the hall floor when it is removed. Other forms of fixing to the hall floor, such as cable clips, nails and bolts are prohibited. Please be advised that all carpet tape must be removed at the end of the show to avoid any dilapidation charges.

Alcohol

Any sale or supply of alcohol at the show must be agreed and licensed by the venue. Selling alcohol for consumption at the show is not permitted.  Please note that there should be no consumption of alcohol during build up and breakdown.

Catering

Amadeus are the exclusive caterers for the venue and all food and drink must be ordered via them. Please note that concessions/corkage charges are incurred when providing your own beverages/food at the show including coffee machines, therefore should you be planning on bringing anything for your stand please contact our show events coordinators. 

Distribution of promotional material & demos

Exhibitors may only conduct business and distribute literature from within their stand, not in the gangways or any other part inside or outside of the Hall. Exhibitors must not take delegates away from the event to another business’ premises, nor host competing events onsite. All activities and demonstrations (e.g. the operation of machines, video and film shows etc.) must be reported in the exhibitor’s Risk Assessment and have the approval of the Operations team. The Operations team is entitled to restrict or prohibit such demonstrations, even if consent has previously been given, if they interfere with the Exhibition.

Noise levels & music system

Music and commentary for demonstrations, videos, presentations etc., using music systems such as a Public Address (PA) or AV Equipment etc., also requires authorization. Exhibitors must ensure the sound is kept to an acceptable level (below 80 decibels from the edge of the stand) and does not disturb adjacent exhibitors. In case of dispute, the Show Management’s decision will be final.

Compressed air

Use of gases will only be permitted where essential, by exception, and where evidenced in a Risk Assessment as a special risk. A certificate of installation by a GAS SAFE registered fitter is required for LPG installations. Only one cylinder can be kept on the stand at any one time. Cylinders which have never contained gas (as opposed to cylinders which have been emptied) may be used for display purposes.

Health & Safety Guidelines

Easyfairs Ltd take their responsibility, as laid out in accordance with the Health & Safety at Work Act 1974, very seriously and it is vital that Exhibitors and contractors do the same. The Health & Safety at Work Act embraces the Exhibition and Conference venues as places of work. As an exhibitor, it is essential that you are aware of your obligations of the Act.

These responsibilities are to ensure, so far as is reasonably practicable, the health, safety and welfare of all employees and any plant, article, substance or system of work, which may be used, are safe and without risk to health.

This includes that all employees and contractors employed by you are provided with information, instruction, training and supervision to ensure the health & safety of themselves and others working, or present, in the vicinity by what they do or fail to do. Main areas which you must give due thought and consideration to before and during your time on site are

  • Understanding the fire and emergency procedures and location of first aid centres. All staff must be notified of these procedures
  • There is an important need to keep gangways clear during build-up/breakdown and throughout the show open days. These will be identified to you during build-up and breakdown of the show
  • Working at height must be done in a safe manner using suitable equipment in the approved way i.e. steps, scaffold towers, hard hats etc.
  • All powered access equipment, i.e. forklift trucks, cranes etc. must be operated by GES Logistics – no one else will be permitted to drive or operate machinery of any description in the loading bays or exhibition hall
  • Only acceptable substances are allowed on-site and full compliance with the COSHH (Control of Substances Hazardous to Health) regulation is required, e.g. fluorescent type lighting tubes require specialised disposal as hazardous waste
  • Personal Protective Equipment (PPE) is to be used if other protective measures are unrealistic and that employees are trained in its use and limitations
  • Ensure portable power equipment is only used for the purpose for which it is designed, with safety guards and devices fitted and used. Power leads must be kept to a minimum and not cross gangways. Power requirements must not overload the systems. Such equipment must never be left unattended with power supplied to it
  • Please do not create a floor hazard at any time
  • All staff must be trained to ensure that safe working practices and good housekeeping is maintained in all work areas, minimising hazards
  • At all times Exhibitors must obtain their contractors Health & Safety Policy, details of specific safety procedures, competence and training of staff and the named individual safety officer responsible for the company.

Please ensure all contractors employed are aware of these health & safety responsibilities. 

Please complete the Health & Safety form and the Risk Assessment.

 

Construction Design Management Regulations (CDM)

Since the HSAWA Act in 1974, event organisers have calculated the risks associated with the construction and deconstruction of events, and enforced controls to ensure that all employees, contractors and visitors were provided with a healthy and safe working environment while onsite.

In April 2015, The Construction Design Management legislation came into force in the UK to further regulate the industry and ensure that safety was the highest priority.

It is now the responsibility of organisers, as principle contractors, to do all that is reasonably practicable to prevent personal injury and damage to property, and to protect everyone from foreseeable work hazards at all locations. 

Co-operation and participation of all employees, trainees and sub-contractors is essential to obtain high standards of safety practices. Therefore, no exhibitor or contractor will gain entry to the halls during build up or breakdown, without reading and agreeing to of the Site Induction Rules, which will be displayed when arriving onsite. You will be issued with a wristband on completing this process